Как правильно произносить на английском языке (и мне перевод не нужен) I think the development of technology…

ПЖЖЖЖЖ ПОМОГИТЕ С АНГЛ ДАЮ СТО БАЛЛОВ!
Writing
Task 2. Write an essay on the theme «Will Robots Reduce or Increase Human Employment Opportunities?»

Criteria for writing:

✔write introduction, main body and conclusion include reasons, examples and support your attitudes

✔use linking words

✔use sophisticated topic related vocabulary

✔use future tenses active and passive forms
​

Срочно нужен перевод на руссий язык.

Text “Automation”

Automation is the system of manufacture performing certain tasks, previously done by people, by machines only. The sequences of operations are controlled automatically. The most familiar example of a highly automated system is an assembly plant for automobiles or other complex products.

The term automation is also used to describe nonmanufacturing systems in which automatic devices can operate independently of human control. Such devices as automatic pilots, automatic telephone equipment and automated control systems are used to perform various operations much faster and better than could be done by people.

Automated manufacturing had several steps in its development. Mechanization was the first step necessary in the development of automation. The simplification of work made it possible to design and build machines that resembled the motions of the worker. These specialized machines were motorized and they had better production efficiency.

In the 1920s the automobile industry for the first time used an integrated system of production. This method of production was adopted by most car manufacturers and became known as Detroit automation.

The feedback principle is used in all automatic-control mechanisms when machines have ability to correct themselves. The feedback principle has been used for centuries. An outstanding early example is the flyball governor, invented in 1788 by James Watt to control the speed of the steam engine. The common household thermostat is another example of a feedback device.

Using feedback devices, machines can start, stop, speed up, slow down, count, inspect, test, compare, and measure. These operations are commonly applied to a wide variety of production operations.

Computers have greatly facilitated the use of feedback in manufacturing processes. Computers gave rise to the development of numerically controlled machines.

More recently, the introduction of microprocessors and computers have made possible the development of computer-aided design and computer aided manufacture (CAD and CAM) technologies. When using these systems a designer draws a part and indicates its dimensions with the help of a mouse, light pen, or other input device. After the drawing has been completed the computer automatically gives the instructions that direct a machining centre to machine the part.

Another development using automation are the flexible manufacturing systems (FMS). A computer in FMS can be used to monitor and control the operation of the whole factory.

Automation has also had an influence on the areas of the economy other than manufacturing. Small computers are used in systems called mod processors, which are rapidly becoming a standard part of the modern office. They are used to edit texts, to type letters and so on.

Many industries are highly automated or use automation technology in some part of their operation. In communications and especially in the telephone industry dialing and transmission are all done automatically. Railways are also controlled by automatic signaling devices, which have sensors that detect carriages passing a particular point.

Not all industries require the same degree of automation. Sales, agriculture, and some service industries are difficult to automate, though agriculture industry may become more mechanized, especially in the processing and packaging of foods.

The automation technology in manufacturing and assembly is widely used in car and other consumer product industries.

Nevertheless, each industry has its own concept of automation that answers its particular production needs.

сообщение роль современных технологий в жизни (На английском)​

1. In what ways have computers transformed our lives? 2. How did earlier contributions from other cultures figure in the development of the computer? 3. Who owns and manages the information on the Internet? 4. How will the expanding of digital technology change the Internet of the future? 5. Why do some people fear that intelligent computers will replace people? помогитеее пожалуйста даю 70 балов и лучший ответ !​

Прочитай текст и заполни пропуски данными словами. Два слова в списке

Лишние.

fiction

than

used

fantasy

invented

then

mistakes

Robots appeared many years ago. They are involved in many areas of life. The word

«robot» can often be found in science fantasy stories. Robots were

invented and used in different industries. They work with computer programs.

Robots are very useful because they work faster

people. In addition,

they don’t have holidays and they can work in dangerous environments. Robots

are well programmed and don’t make

Nowadays robots are often

for cleaning. Robots have already become an integral part of our life.

can you say that we live at the time of a new technological revolution?Support your answer. ОТВЕТЬТЕ ПОЖАЛУЙСТА​

Writing Task 2. Write an essay on the following topic: Do you think modern technology has made life easier and safer? Or do you think that modern technology has made life more difficult and more dangerous? What are the advantages and disadvantages of modern technologies? Follow this structure: Paragraph 1: What general information about technologies can you give? State your opinion (thesis). Paragraph 2: What are the advantages of modern technologies? Paragraph 3: What are the disadvantages of modern technologies» Paragraph 4: What’s your overall opinion? Restate the thesis.​

Перепишите предложения и переведите на русский язык ,обращая внимание на разные значения слов it,that,one.

1. The modern combine-harvesters replaced the old ones.

2. Engines can supply quantities of energy far beyond that of men or animals.

3. The combine cuts and thresher out the graine as it moves across the field.

4. One must know that modern combine-harvester represent almost great an advance over the horse-drawn reaper.

5. It was also the electric power that made rapid gains.

Выпишите глаголы, укажите залог и время.

1.Charged particles are influenced by electric fields.

2.Thomson’s discovery of electron was followed by many other exciting discoveries.

3.It was found that the substance was radioactive.

4.Steps are taken to increase the production of our plants.

5.The result of the experiment is shown in fig.11.

6.Chemical methods of purifying water are given much attention to at present.

7.The new discovery was being much spoken about.

8.This problem can be solved by a new kind of electronic computers.

9.The performance of the new computer will be demonstrated tomorrow.

10.Samuel Morse believed that electricity could be used to send messages.

11.The new device had been tested for two hours when the chief engineer came and

stopped the experiment.

12. The relay was given its initial position.

13. The molecules of even a good insulator are acted upon by an electric field.

14. The operation of the new device was looked at with great interest.

15. The discovery of the electron was followed by the discovery of the proton and neutron.

16. After the international conference on ecology it has become possible to begin working at environmental problems on a global scale.

17. Some scientists and engineers are working at improving traditional production processes, others are developing new technologies.

18. The new instruments will enable us to determine the level of pollution in our rivers.

19. Our technological advances make it possible to deal with the most difficult problems.

20. Our lecturer’s book on strength of materials is well-known and popular.

21. One must study six years to become an engineer.

22. There is a big library in the new building of our institute. It is a very good library. One may get all the necessary books there and it is possible to keep them till the end of the academic year.

23. It is well-known that technological progress is impossible without electronics, computers, robots and new materials.

24. That ecological problems have become the most important ones at present is evident to all.

25. What is necessary for the students is to get a good qualification.

26. That S.P. Korolyev was the founder of practical cosmonautics is a well- known fact.

27. That theory is combined with practical training is a very good tradition of our educational system.

28. That it is necessary to develop an international ecological program is realized throughout the world.

29. It is evident that electricity will be the energy of the future.

30. The transformer was invented and the first electric lines and networks were set up at the end of the 19th century.

як написати класна робота на англійській мові